Screen Door Repair & Replacement in Venice, FL

The door is the hardest-working part of any lanai or pool cage. It swings a dozen times a day, it takes the pressure washer and the dog, and it is the panel people push through with their hands full. When it drags, slams, will not latch, or has torn at the kick plate for the third time, the door needs attention on its own, not just another piece of mesh.

Adjust, repair, or replace

Many doors only need adjusting: hinges re-set, the closer re-tensioned, the latch re-aligned so it catches without a shove. Others need parts. Aluminum cage doors take new hinges, pneumatic closers, latches, and kick plates that fit their frame, and the contractor carries the common ones. When a door is racked, corroded at the hinges, or has been re-meshed so many times the channel is worn, a new door hung square in the opening is the better spend. The contractor tells you which at the visit.

Mesh for doors

Door mesh takes more abuse than any wall panel. Standard 18/14 is fine on a lightly used door; pet-grade vinyl polyester on the lower half is the usual answer where dogs go in and out. Kick plates protect the bottom from feet and furniture.

Self-closing and pool safety

Florida pool barrier rules expect cage doors on residential pools to be self-closing and self-latching, opening outward away from the pool. A closer that has lost its tension or a latch that does not catch is a safety item as much as a convenience. The contractor checks both on every door visit.

Part of a larger job

Door work pairs naturally with a lanai or porch rescreen, and on older cages a new door is often the finishing touch on a makeover. Door hardware and re-meshing inside an existing frame generally do not require a permit.

Call (941) 555-0101 or request your FREE, no obligation written estimate.