Venice Island is where the 1926 Nolen plan and its required Mediterranean Revival architecture still stand, and the historic district was added to the National Register in 2010. Around the older blocks, most of the housing is single-story ranch from the 1950s through the 1980s, with condos along the Gulf side. The cages behind those ranches are often as old as the houses, and the island's instinct is to restore rather than raze.
Venice Lanai Screens connects homeowners on Venice Island with a local screen contractor who works the same way. Chalked, faded framing gets cleaned, sealed, and recoated in a frame repainting and cage restoration job. Rust streaks at the screw heads say the original zinc-coated fasteners have been meeting Gulf air for decades; stainless fastener replacement renews every connection with 316 stainless. A single split panel is a screen panel repair matter, and the visit sets the scope. The blocks around the Venice Art Center show what a century of upkeep looks like; a lanai can look that way too.
Call (941) 555-0101 for a FREE, no obligation written estimate anywhere on Venice Island.
The makeover: chalked, oxidized aluminum cleaned, prepped, and refinished, with stainless hardware and fresh screen done in the same project. The cage you have, looking like the cage you bought.
Full or partial mesh replacement on aluminum pool enclosures. Walls, roof panels, or the whole cage, with new spline throughout and mesh matched to how the cage faces.
Fresh mesh and spline for under-truss lanais, screened porches, and patio rooms, with door panels and kick plates renewed at the same visit.
Every screw connection in the cage renewed with marine-grade stainless steel. The least visible part of a renovation and the one that matters most when the wind comes back.
Single panels and small sets: torn mesh, blown spline, sagging sections. Mesh matched to the existing weave and color so the repair disappears.
Doors that drag, slam, or will not latch. New mesh, hinges, closers, latches, and kick plates, or a new door hung square when the old one is past adjusting.
A before-June walk-around: cable tension and anchors, fastener condition, spline and mesh, door hardware, with a written punch list you can schedule from.